Zoom Hyper Lead HL-01 Instrucciones de operaciones descargar pdf (Pagina 43)

Changing Basic Settings

Recording

PMW-100: Set the FOCUS/ZOOM switch (page

13) to FOCUS and the FOCUS switch (page 16)

to MANUAL.

PMW-200: Slide the focus ring forward (to lens

hood side), then set the FOCUS switch (page 15)

to MANUAL.

In this mode, expanded focus function, peaking

function, one-push auto focus function and the

MF Assist function are activated.

Rotate the lens operation ring (PMW-100) or

focus ring (PMW-200) while looking at the LCD

monitor/EVF screen to adjust the focus.

One-Push (Momentary) Auto Focusing

When you press the PUSH AF button, auto

focusing momentarily activates. One-Push Auto

Focusing is terminated when the subject comes

into focus.

MF Assist function

If you set “MF Assist” (page 81) in the CAMERA

SET menu to “On” to enable the MF Assist

function, auto focusing is engaged when you stop

rotating the lens operation ring, performing fine

focus adjustment for the subject in the center of

the screen. When the fine adjustment is

completed, automatic focusing with the MF

Assist function is terminated.

You can also enable the MF Assist function via

the Direct menu (page 20). When you press the

DISPLAY button, the selected focus mode is

displayed on the screen (page 19). The Direct

menu cannot be selected in a mode other than MF

mode.

Adjusting in AF Mode

AF (Auto Focus) mode adjusts the focus

automatically.

PMW-100: Set the FOCUS switch (page 16) to

AUTO.

PMW-200: Slide the focus ring forward, then set

the FOCUS switch to AUTO.

Using Macro Mode (PMW-200 only)

When you set the MACRO switch to ON in AF or

MF mode, Macro mode is activated, permitting

you to adjust the focus in a range that includes the

micro area.

The Macro mode is invalid in Full MF mode.

Set “Steady Shot” (page 85) in the CAMERA

SET menu to “On.”

When you press the DISPLAY button, the setting

of the Steady Shot function is displayed on the

screen (page 19). The Steady Shot function can

also be activated via the Direct menu (page 20).

Two operation modes are provided for Steady

Shot: Normal mode and Wide mode (for a wide-

conversion lens).

When you attach the optional wide-conversion

lens, be sure to set “Wide Conversion” (page 85)

in the CAMERA SET menu to “On.”

Note

If the camcorder is fixed to a tripod, etc., for stability,

deactivate the Steady Shot function.

NightShot is convenient for recording in dark

areas.

Set “Setting” in “NightShot” (page 85) in the

CAMERA SET menu to “On.”

You can also assign NightShot to an assignable

button (page 48) to change value of “Setting” to

“On”/“Off.”

To emit an infrared line

Set “NS Light” in “NightShot” (page 85) in the

CAMERA SET menu to “Auto” to automatically

emit an infrared line from the IR transmitter (page

14).

Notes

• Avoid covering the IR transmitter with your finger

when using the NightShot infrared line

• The infrared line can reach to about 3 meters.

• If the image is out of focus, adjust the focus manually.

• Using this in a bright area may damage the camcorder.

• When you set the camcorder’s power switch to “OFF,”

NightShot is automatically disabled.

Steady Shot

Note on use of a wide-conversion lens

NightShot (PMW-100 only)

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 139 140

Comentarios a estos manuales

Sin comentarios

Zoom Hyper Lead HL-01 Instrucciones de operaciones Pagina 43

Comentarios a estos manuales

Relacionado con productos y manuales para Videocámaras Zoom Hyper Lead HL-01