Zoom AP+4 4401A Manual de usuario descargar pdf (Pagina 8)

Troubleshooting Tips

Problem

I followed the instructions for connecting the AP+4 hardware and

entered 10.0.0.200 in my Web browser’s address bar, but I

cannot access the AP+4.

Solution

First, manually reset the AP+4: insert a paper clip into the

RESET opening on the back panel and press and hold for 10

seconds. After you’ve done that, re-enter 10.0.0.200 in your Web

browser’s address bar.

If you still cannot access the AP+4, follow the steps below to

make sure the computer’s TCP/IP settings are correct.

Windows Vista Users:

1 From the desktop, click the Start button, select Control

Panel, and then double-click Network and Sharing Center.

2 In the Network and Sharing Center window, under Tasks,

select Manage Network Connections.

3 In the Network Connections window, double-click the

Wireless Network Connection option.

4 In the Wireless Network Connection Status dialog box,

click the Properties button.

5 In the Network Connection Properties dialog box, highlight

the version of TCP/IP that you are using and click the

Properties button.

6 Select Use the following IP address and enter 10.0.0.100

and 255.255.255.0 as the IP address and Subnet mask,

respectively.

7 Click OK, then click Close.

8 Re-enter 10.0.0.200 in your Web browser’s address bar.

Windows XP Users:

1 On the Windows desktop, click the Start button, open

Control Panel, and double-click Network Connections.

2 Right-click the Local Area Connection icon and select

Properties.

3 Highlight the Internet Protocol (TCP/IP) entry and click the

Properties button.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 23 24

Sin comentarios

Zoom AP+4 4401A Manual de usuario Pagina 8