Zoom G2.1NU Manual de usuario descargar pdf (Pagina 26)

ZOOM G2Nu/G2.1Nu

1. Connect a foot switch (FS01) to the

CONTROL IN jack.

2. Press the USB/GLOBAL key to light it and

open the GLOBAL menu.

3. Use the effect type [▼]/[▲] keys to select

"FootSwitch."

4. Turn Parameter knob 1 to set the foot

switch function.

The foot switch can be set to one of the following

functions.

BP/MT Set the unit to bypass/mute.

BANK UP Increase the bank number by one

with each press of the foot switch.

RHYTHM TurnRhythmmodeON/OFF.

BPM TAP Set the tempo used for the rhythm,

looper and effect by pressing the

foot switch repeatedly at the

desired tempo.

DL TAP Set the Time parameter of the

DELAYmodulebypressingthe

foot switch repeatedly.

DLHOLD Turn hold delay ON/OFF. Hold

delay is a function that allows the

delay sound to be repeated without

decay(seetheillustrationbelow).

DL MUTE TurntheDELAYmodule'sinput

mute ON/OFF.

TouseDLTAP,DLHOLDorDLMUTE,you

mustturntheDELAYmoduleON.

5. After making the setting, press the USB/

GLOBAL key again to turn its light out.

HINT

The foot switch function setting affects all

patches. Moreover, this setting is saved even

when the power is turned OFF.

UsingaFootSwitch

YoucanconnectanoptionalfootswitchtotheCONTROLINjack,anduseittocontroladditionalsettingsoftheunit

with your feet, for example, by changing banks and operating effects.

Sound

source

Delay sound

Press the foot switch

Hold delay

Hold

Press again

HINT

Foot switch function

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 55 56

Comentarios a estos manuales

Sin comentarios

Zoom G2.1NU Manual de usuario Pagina 26

Comentarios a estos manuales

Relacionado con productos y manuales para Instrumentos musicales Zoom G2.1NU