Zoom Dialer 26 Guía de usuario descargar pdf (Pagina 12)

12 Dialer Installation & User’s Guide

Example: If your local area code is 555, take your phone

off-hook and enter #94 555 ##.

After getting this command, the dialer will no longer auto-

route calls within your local calling area. (Note: your local

calling area may include from one to about ten area codes.

You only have to enter your own area code. The dialer

knows all the other area codes in your local calling area.)

Note:

If you skip this step and you will use the dialer to

auto-route North American domestic calls, you must be

sure you want to route all numbers that start with 1, even

if they are Internet access numbers. Be careful about this,

or you may get a big phone bill for Internet access!

If you later decide that you

want to route local calls

that start with 1, take your phone off-hook and enter

#93##

If you want to tell the dialer a

new

local area code—for

example, if you move—and you don’t want the dialer to

route local calls that start with 1, use the #93## command

first, and then use the #94 <local area code>## command

detailed above for your new area code.

(

Note:

Entering #93## will also reset any other special

routing commands you may have entered. These other

commands are detailed in the

Routing Commands

section below.)

Bypassing the Dialer in AutoRoute Mode

In AutoRoute Mode you can bypass the dialer for any call

by taking your phone off-hook and dialing

* 0

Now wait for dialtone, and then dial the number you want

to call [* 0 will not work if keys are enabled).

Routing Commands

For most installations where AutoRoute Mode is selected,

the configuration described above will be sufficient. In that

case, please go to page 14 if you want to change the DTMF

settings, and otherwise go to

Using the Dialer

on page 15.

When you tell the dialer your area code (via the

#94 <local

area> ##

command), the dialer develops a list of “local”

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 31 32

Comentarios a estos manuales

Sin comentarios

Zoom Dialer 26 Guía de usuario Pagina 12

Comentarios a estos manuales