
12
Connecons
Connections
Refer to the illustration below to connect instruments, mics, other audio equipment and a computer,
for example.
❷
❶
❾
❽
❸
❺
❹
Connect cables with XLR or phone plugs (mono/stereo, balanced/
unbalanced) to the
INPUT
jacks.
❷ Stereo systems, speakers
with built-in ampliers, etc.
❶ Headphones
❼ FOOTSWITCH
Connect a ZOOM
FS01 footswitch (sold
separately), and use it
to stop/start playback
or punch-in/out, for
example.
❾ AC adapter
Only use a ZOOM
AD-17 AC adapter,
which is designed for
use with this unit.
❸ Microphones ❺ Guitar/bass
To connect a passive electric
guitar or bass directly:
• Connect it to INPUT 1.
• Set input selection switch 1 to
GUITAR BASS (Hi-Z).
• Connect a mic to INPUT 1 or 2.
• Set the input selection switch to
MIC LINE.
• Set the PHANTOM switch to
ON to supply phantom power to
a condenser mic.
❻ Built-in microphones
Use the built-in mics on the left
and right of the unit to record
drums or a band performance,
for example.
• Set both input selection
switches (1 for left and 2 for
right) to BUILT-IN MIC.
❹ Devices with stereo outputs
When using a synthesizer, a CD
player or other stereo devices:
• Connect OUTPUT jack L to
INPUT 1 and R to INPUT 2.
• Set both input selection switches
to MIC LINE.
Outputs Inputs
Right side panel
Rear panel
❽
Computer USB port connections
When connected to a computer, you
can transfer audio les with it, for
example. You can also use the
as an audio interface and a control
surface for DAW software.
Comentarios a estos manuales