Zoom R8 Manual de usuario Pagina 34

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 140
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 33
Recording and playback
34
Combining multiple tracks into 12 tracks (bouncing)
Bounce to mix and record multiple tracks as 1–2 tracks. This is also called “ping-pong recording.”
1
Press
Return to the start of the project.
5
HINT
Bouncing creates a new file in the same
project.
If you set the bounce destination to a mono
track, the recorded signals are mixed to
mono. If set to a stereo linked pair of tracks,
the recorded signals will be mixed to stereo.
You can also include signals input through
the INPUT jacks when bouncing.
For information about adjusting sounds
and using effects while bouncing, refer to
"Mixing" on P.40.
3
Select
BOUNCE TR
.
4
Select
Play
.
Bounce destination track settings
PROJECT
>
REC
>
BOUNCE TR
Start from the Top Screen
1
Select the bounce source tracks
(set each track to play back).
Press 1–2 times until
indicator lights green
Lit green: ready to PLAY
2
Select bounce destination track(s).
Press 1–2 times until
indicator lights red
Lit red: ready to record
Bouncing (preparation)
Select
REC
.
2
Press
Change menu
Change menu
Change
setting
BOUNCE TR: bounce destination track
Setting
Mute Mute the bounce destination track (default)
Play Play and record the bounce destination track
To include the bounce destination track
Vista de pagina 33
1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 139 140

Comentarios a estos manuales

Sin comentarios