Zoom R24 Manual de usuario Pagina 102

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 140
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 101
Changing the SD card while the power is on
101
Changing the SD card while the power is on
YoucanchangetheSDcardwhilethepowerison.Dothisiftheremainingcapacityofthe
insertedcardisloworifyouneedtoimportpreviouslyrecordeddatafromtheSDcard.
Save R24 data to the new SD card
Load data from the new SD card
NOTE
• Disablewrite-protectiononanSDcardbefore
inserting it.
• SAVE includes various data for the project in use,
but no audio data is saved.
SD cards
1
Press
Select SD CARD.
2
Press
Change menu
Card replacement
possible
Press
Select EXCHANGE.
3
Change menu
Select LOAD.
6
Press
Change menu
6
Select SAVE.
Press
Change menu
8
Select EXECUTE.
Press
7
Select SAVE TO and set the project
where you want to save it
Change setting
Change menu
5
Insert an SD card
4
Remove the SD card
NOTE
•IftheinsertedSDcardisalreadyformattedfor
theR24,proceedto Step6of"Loaddatafrom
thenewSDcard"or"SaveR24datatothenew
SDcard".
IfyouinsertanSDcardthathasnotbeen
formattedforusewiththeR24,followtheproce-
duresforformattinganSDcardonthenextpage.
Vista de pagina 101
1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 139 140

Comentarios a estos manuales

Sin comentarios