Zoom R24 Manual de usuario Pagina 13

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 140
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 12
SD card installation
12
SD card installation
TheR24savesrecordingdataandsettingsonSDcards.
To protect your data, turn the power off before inserting or ejecting a card.
NOTE
•IfyouwanttochangetheSDcardwhilethepower
isON,followspecialprocedures(seeP101).
•WheninsertingorremovinganSDcard,always
turn the power OFF. If you do so when the power
is ON, recording data might be lost.
•Ifyoucannotinsertacardintotheslot,you
might be trying to insert it in the wrong direction
or upsidedown. Try again with the correct card
orientation. If you force the card in, you might
break it.
•IfanSDcardwas previouslyusedwitha
computer or a digital camera, you must format it
intheR24beforeusingit.
•IfnoSDcardisinserted,theRECkeywillnot
functioninRecorderMode.
Turn the power OFF beforehand (ordinary use)
Preventing unwanted removal of an SD card
1
Turn the POWER OFF and detach
the cover of the SD card slot.
2
Insert an SD card that is not
write-protected into the slot
completely.
To eject, push the card in first .
Remove the screw near the slot,
and screw it into the hole in the
SD card cover.
AnSDcardisnecessaryforrecording.
Unlock the write-protection
HINT
•ThisunitcanuseSD cardswithcapacitiesof16
MB~2GB,aswellas4~32GBSDHCcards.
•Youcancheckthemostrecentinformationabout
compatibleSDcardsontheZOOMwebsite.
 http://www.zoom.co.jp
Ref:SDCARD>EXCHANGE
  SDCARD>FORMAT
P101
P102
If one of these messages is shown
•“NoCard”:NoSDcardisdetected.Makesurean
SDcardisinsertedproperly.
•“CardProtected”:TheSDcardwrite-protectionlock
is closed, preventing rewriting. To release it, slide the
switch away from the lock position.
Vista de pagina 12
1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 139 140

Comentarios a estos manuales

Sin comentarios